SJD series rail hydraulic lift platform 

 [400-6077-678] 

 Rail hydraulic lift platform is a non-hydraulic scissor lift tables, for more than two-story industrial plants, restaurants cargo transport, as a minimum height of only 150-300mm, not the most practical excavation pit at the workplace , while the upper transfer point need not, and have many forms (single column, double column, four-poster), is smooth, easy operation and reliable, hydraulic, electrical goods, transport a variety of economic and relaxed. (Specific capacity and the increased number of layers, size can be customized design) 
 Rail hydraulic freight elevators, freight elevators primarily work with a variety of goods between the upper and lower layer transport; parking and underground garage for more than two-story high-rise buildings, the place can not be excavated pit, can not reach the top height of the occasion so demands more difficult to solve small space, Long Hao Hydraulic Machinery Co., Ltd. Jinan will make every effort to tailor for you looked efficient delivery platform, the product of hydraulic system to set anti-dropping, the door on the lower chain interaction, the floors and countertops can set the elevator button operation , multi-point control. Product rugged carrying capacity, steady lifting, installation and maintenance simple and convenient, low economic and practical alternative to the elevator between floors ideal for cargo transportation equipment. Elevator installation according to the environment and requirements, select a different option configurations can be used to obtain better results, 
 ● Maximum load 15 tons, multi-point control, interlock the upper and lower floors of interactive, up safe use; 
 ● lifting height is high, the use of sunk tanks, or double-cylinder-type test, run smooth, no noise, easy maintenance, long service life; 
 ● manual power down, emergency stop buttons, convenient, fast and practical; 
 ● layer can be run through the door, inside and outside the plant can poke each other to open, convenient, save space; 
 ● suitable for 2-6 layer steel plants, both internal and external use; 
 ● imported pump pumping station, if the speed is too high, imported custom pumping stations, to achieve the desired delivery requirements, 
 ● cylinder and seals imported parts and components to solve customer hydraulic unstable parts leakage problems, 


 Civil engineering advantages: 

 ● no room above the shaft, the top height of 3.5 meters or more can be installed. 
 ● room can be set in the well within a radius of 15 meters, occupies an area of ??only 3-4 square. 
 ● Hydraulic elevator does not set the counterweight, to improve utilization of the shaft area. 
 ● Hydraulic lift the load, load through the cylinder directly on the pit, shaft strength requirements of low, brick or masonry structure to the shaft. 

 Security and stability advantages: 

 Hydraulic elevator with traditional traction elevator safety device is also equipped with: 
 ● relief: prevent upward movement of the system pressure is too high 
 ● emergency manual valve: the power failure, emergency car can drop location to the nearest floor to open the door, 
 ● manual pump: When the system fails, manipulate the hand pump high pressure oil to hit the car up to the nearest floor location; 
 ● pipe rupture valve: When the hydraulic system pipe rupture stalled car down, it can automatically stop the decline in oil cut 
 ● oil tank protection: When the tank when the oil temperature exceeds the standard set value, the oil temperature protection of signal, suspended the use of elevators, when the oil temperature before starting down the elevator. 


 Operating cost advantage: 

 ● Failure rate: the use of advanced hydraulic system, and have a good control, elevator failure rate is approaching a minimum. 
 ● low power consumption: hydraulic elevator down, the pressure generated by the weight-driven, large energy saving. xyx